Capacitor:
A capacitor is a passive electronic component that stores electrical energy in an electric field. It consists of two conductive plates separated by an insulating material (dielectric). Capacitors are used in various circuits for energy storage, filtering, timing, and signal coupling.
Circuit:
A circuit is a closed loop through which electricity can flow. It comprises a power source, conductive pathways (wires), and electrical loads (devices that consume electricity). Circuits can be series or parallel, each offering distinct advantages in various applications.
Conductor:
A conductor is a material that allows electric current to flow through it with minimal resistance. Metals like copper and aluminium are commonly used as conductors due to their high conductivity, facilitating efficient electrical transmission.
Current:
Current, measured in amperes (amps), represents the flow of electric charge through a conductor. Continuing with our water analogy, current is analogous to the rate of water flow through the pipe. Higher current indicates a greater flow of electricity through the circuit.
Diode:
A diode is a semiconductor device that allows current to flow in one direction while blocking it in the opposite direction. Diodes are commonly used in rectifier circuits, converting alternating current (AC) to direct current (DC), and in various electronic applications such as voltage regulation and signal modulation.
Frequency:
Frequency, measured in hertz (Hz), refers to the number of cycles per second in an alternating current (AC) waveform. It determines the rate at which the direction of current flow changes in an AC circuit. Understanding frequency is essential for designing and analysing AC circuits and electrical systems.
Grounding:
Grounding is a safety measure that provides a path for electric current to flow safely into the ground. It prevents the accumulation of excess voltage and reduces the risk of electric shocks and equipment damage. Proper grounding is essential for ensuring electrical safety in residential, commercial, and industrial settings.
Impedance:
Impedance is a measure of the opposition to the flow of alternating current (AC) in a circuit. It includes resistance, inductance, and capacitance components and is measured in ohms (Ω). Impedance affects the behaviour of AC circuits, including voltage and current distribution, resonance, and power transfer.
Inductor:
An inductor is a passive electronic component that stores energy in a magnetic field when current flows through it. It consists of a coil of wire wound around a core material. Inductors are used in circuits for energy storage, filtering, and impedance matching.
Insulator:
An insulator is a material that inhibits the flow of electric current. It has high resistance and is used to isolate conductors and electrical components, preventing unintended contact and short circuits. Insulators are crucial for ensuring electrical safety in wiring and electrical devices.
Ohm’s Law:
Ohm’s Law is a fundamental principle in electrical engineering that relates voltage, current, and resistance in a circuit. It states that the current flowing through a conductor is directly proportional to the voltage applied across it and inversely proportional to the resistance of the conductor.
Resistor:
A resistor is a passive electronic component that limits the flow of electric current in a circuit. It is characterised by its resistance value, measured in ohms (Ω). Resistors are used to control current flow, divide voltage, and protect components from excessive current.
Resistance:
Resistance, measured in ohms (Ω), denotes the opposition to the flow of electric current in a circuit. It’s akin to a narrow section in a water pipe that impedes water flow. Different materials exhibit varying levels of resistance, influencing the efficiency and performance of electrical systems.
Short Circuit:
A short circuit occurs when an unintended connection forms between two points in a circuit with low resistance. It results in a sudden surge of current, potentially causing overheating, sparks, and fires. Protective devices such as circuit breakers and fuses are vital for detecting and mitigating short circuits.
Transformer:
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. It consists of two or more coils of wire (known as windings) linked by a magnetic core. Transformers are used to step up or step down voltage levels in power distribution and electrical equipment.
Voltage:
Voltage, measured in volts (V), signifies the electrical potential difference between two points in a circuit. It’s akin to the pressure in a water pipe that propels water forward. When you turn on an electrical device, you’re essentially allowing voltage to flow through the circuit, powering the device.
Series Circuit:
A series circuit is a circuit where components are connected end-to-end, forming a single path for current flow. The same current passes through each component.
Semiconductor:
A semiconductor is a material that has electrical conductivity between that of a conductor and an insulator. It forms the basis of modern electronics, including diodes, transistors, and integrated circuits.
Volt:
Volt is the unit of electrical potential difference or electromotive force. It represents the force that drives electric current through a conductor.
Watt:
Watt is the unit of power, symbolised by the letter W. It measures the rate at which work is done or energy is transferred or converted in an electrical circuit.
Understanding electrical terminology is essential for anyone working with electricity, from aspiring electricians to seasoned professionals. At Learn Trade Skills, we’re committed to demystifying complex concepts and empowering individuals to excel in the field of electrical engineering. Armed with this knowledge, you’ll navigate the world of electricity with confidence and competence, making meaningful contributions to your community and beyond.
Ready to embark on your journey into the world of electrical engineering? Join us at Learn Trade Skills and unlock your potential in this dynamic field. Speak to one of our professionals today and embark on a journey towards becoming a qualified electrician.
Sezai Aramaz is the esteemed founder of Learn Trade Skills, boasting over 40 years of experience in the electrical industry in the UK. With two decades dedicated to educating future electricians, he served as an Electrical Installation Lecturer and Assessor. Aramaz's expertise and commitment have contributed significantly to the growth and proficiency of aspiring tradespeople in the field.
Skip to content 
